Wireless Data Networking
An overview and brief comparison of the various RF technologies that are in use today. Axxcerlera's product line provides flexibility and focus to any specific wireless data networking needs.
Laptops and competition between Internet Service Providers (ISPs) have resulted in an increased focus on the use of RF technologies to provide data access services. Whether you desire to web surf from your laptop while enjoying a cup of espresso at the local coffee house or a business looking for ways to reduce Internet access fees, you are likely asking the question, "Can I do this wirelessly?"
Most laptops today come equipped with wireless network connections. However, these wireless network connections are useless unless there is a wireless service available. Laptop computers now face the same problem that cell phones face: Where's the signal?
Internet access for companies has traditionally been provided through special phone company circuits called T1s (or E1s). But local exchange companies (LECs) have traditionally held service monopolies in their markets and as a result T1/E1 service had no competition … if you wanted high speed Internet access, you had to pay the high monthly T1 lease fees. However, competition in the phone industry has been established and as a result, competing ISPs, CLECs, WISPs, etc. have been deploying their own networks (including wireless portions) from which to offer data networking services such as high speed access as well as plain old telephone service (POTS).
As you can see, there are several markets to be served by the wireless Internet Service Provider industry (WISP). No one product can serve all the myriad of applications and as a result there are now several wireless technologies to choose from. These technologies fall into two categories: standard technologies such as 802.11 (WiFi) and 802.16 (WiMax) and proprietary technologies. Each technology has its own advantages and disadvantages. But this is not the only way to distinguish wireless technologies.
Other technology differences have to deal with whether the technology is point-to-point (PTP), point-to-multipoint (PMP), or something else (ex: mesh). Each of these faces differing regulatory requirements and serves different purposes.
PTP technologies are useful for serving as data backhauls that serve distribution systems (xDSL, cable modems, etc) and for connecting private data networks (ex: office buildings). PMP technologies are useful as distribution systems since more than one "end point" (customer premise) is served by a single "start point" (basestation).
Another key difference in wireless technologies is the geographic distance they are to serve. The term "hot spot" (referring to a small geographical area of coverage … for example, a coffee house) has entered into the standard terminology of the wireless data networking industry. But equipment useful for hot spot coverage will not accommodate the needs of the "last mile" application. A bit of a misnomer, the "last mile" has progressed to mean anything from the "last 50 meters/feet" to the "last 20 miles".
Axxcelera Broadband offers products that are engineered to be as flexible as possible while still being focused on specific wireless data networking needs. Refer to the products below to find out more about Axxcelera's fine assortment of wireless data networking products or continue to explore the Technology topics to help you understand which specific products are best suited for you.
Mechanisms for DFS as they relate to the Axxcelera Broadband Wireless family of wireless communication devices are explained.
The Axxcelera ExcelMAX C9 AP and CPE provide for TDD communication over the 3650-3700 MHz band. In the United States this band is a “lightly licensed” band ...
Written by Cyberbajt with forward by Axxcelera, this case study discusses an ExcelMAX project in Poland.
No specials found