AxxceLTE™ eNodeB

AxxceLTE™ eNodeB



The AxxceLTE™ eNodeB product family provides LTE wireless access over a wide range of frequency bands in a compact outdoor design. The family supports all-in-one and distributed architectures facilitating easy expansion while protecting prior capital investment. This best in class system can be configured to provide the optimal performance in the carrier, wireless ISP, industrial, public safety and private markets.

Reasons to Buy AxxceLTE™ eNodeB

Key Features

  • Multi-sector support in a compact all-outdoor installation footprint
  • Flexible deployment options
  • Optimum operational simplicity and efficiency
  • Configurable high performance MIMO radio of either 2 X 5W (low-power mode), 4 X 5W or 2 X 10W
  • Multi-band operation: 700MHz to 3.8GHz
  • Integrated Metro-Ethernet switch
  • Provides Remote Electrical Tilt and 1GbE Power over Ethernet interfaces


  • Easy to install and operate
  • Scalable architecture allowing for growth in the network
  • Robust design suitable for the most demanding markets
  • Can be combined with Axxcelera's AxxceLTE™ µEPC to create a complete broadband access network solution
  • 3GPP compliance:
    Release 9 with software upgrade to Release 10
  • Duplexing mode:
    TDD and FDD support
  • Channel Bandwidth:
    1.4, 3, 5, 10, 15, 20MHz
  • Channel Capacity:
    Up to two 20MHz channels
  • Multi-band support:
    Broadband 650-1450MHz or 1750-3800MHz
  • Transmitter power output:
    10W model: 2*5W or 4*2.5W, 2.5% EVM max
    20W model: 2*10W or 4*5W, 2.5% EVM max
  • Receiver Noise figure:
    Less than 4dB
  • MIMO support:
    2x2 or 4x4
  • Peak data rates:
    SU-MIMO and MU-MIMO support
    2x2 MIMO: DL @ 150Mbps, UL @ 75Mbps
    4x4 MIMO: DL @ 300Mbps, UL @ 150Mbps
  • One-way latency:
    < 5msec (user data)
  • Number of UE's:
    250 active UEs per 2x2 MIMO sector
  • UE support:
    Category 1-5
  • Number of bearers per UE:
  • Self-organizing network (SON):
    As per 3GPP Release 9 specifications
  • Connectors:
    4 x RF Type N; 3 x CPRI V4.1; 2 x GbE (SFP); GbE / PoE PSE; 1PPS-SyncIn; 1PPS-SyncOut; GPS Antenna; RET / AISG V2; Power Input Synchronization Integral GPS, IEEE1588/Synch Ethernet, or external 1PPS
  • Remote Electrical Tilt:
    AISG v2.0, 8-pin DIN per IEC 60130-9
  • Remote radio head interface:
    Three ports per CPRI V4.1, field serviceable SFP modules
  • Backhaul interface:
    Two GbE ports via field-serviceable SFP modules, supports stacking multiple baseband units into a single backhaul pipe
  • Power over Ethernet:
    Gigabit Ethernet power sourcing port per IEEE802.3at, RJ45
  • Management support:
    Operation, Administration, Maintenance, and Provisioning interface to Axxcelera NMS
  • External antenna:
    Dual feed architecture, slant pole beam width 120°, 90° and 60°
  • Physical size:
    32 cm (W) x 52 cm (L) x 24 cm (D)
  • Weight:
  • Temperature:
    -40°C to 55°C
  • Humidity:
    Up to 100% condensing
  • Ingress protection rating:
  • Regulatory compliance:
    FCC, CE
  • Environmental robustness:
    NEMA 4, IEEE1613 compliant
  • Physical security:
    Per FIPS-140-3 Level
  • Power Input:
    36 to 60 VDC
  • Power consumption:
    Up to 200W (not including PoE and RET consumption)
  • Mounting:
    Pole or Wall

Set up a call or live demo with Axxcelera


Product Briefs

Inside Axxcelera


Axxcelera News

Oct 30, 2012

Axxcelera Broadband Wireless Announces AxxceLTE™ Evolved Packet Core (EPC)

Oct 30, 2012

Axxcelera Broadband Wireless Announces AxxceLTE™ eNodeB

Oct 30, 2012

Axxcelera Broadband Wireless Announces AxxceLTE™ Product Family


Axxcelera Events

Aug 24, 2010

Learn more about Axxcelera’s ExcelMAX 3.65GHz and AB-MAX 5GHz WiMAX Systems

Oct 18, 2010

4G World 2010

Aug 25, 2011

Talley Symposium Expo 2011


Axxcelera Specials

No specials found